- Basic debugging process
The Fully Automatic Recycling Origami Machine is one of the most commonly used equipment in filter manufacturing enterprises. Advanced Automatic servo folding machines can not only improve production efficiency, but also greatly save costs. Therefore, how to correctly debug the Filter Folding Machine has become one of the compulsory courses for filter manufacturers.
The debugging of Drum Folding Machine generally includes the following steps:
1) Check if all parts of the Air Filter Paper Pleasing Machine are functioning properly
- Firstly, it is necessary to check whether all parts of the Drum Folding Machine are functioning properly, such as blades, bridge devices, folding shafts, and drive belts, and whether there are any abnormal noises, jamming, or other issues.
2) Set the Filter folding machine parameters based on the size of the paper to be folded
Secondly, machine parameters such as folding length and overlap degree need to be set according to the size of the paper to be folded. At the same time, it is necessary to ensure that the direction of the paper entering the Filter folding machine is correct.
3) Conduct a test run
After adjusting the parameters, it is necessary to conduct a trial run by feeding the paper into the Filter folding machine for testing. At this point, it is necessary to pay attention to whether the creases are clear, the position is correct, and whether there is any paper jam.
4) Confirm after all trial runs are completed
If everything is normal during the trial run, all the paper can be fed into the Automatic servo folding machine for folding. If there are any abnormal situations, it is necessary to readjust the equipment parameters and conduct a trial run again until it is adjusted to the optimal state.
- Common problems and solutions
1) The paper creases are not clear
If the paper creases are not clear, it is likely due to uneven blades or folding axes, or incorrect parameter settings in the Automatic servo folding machine.
Solution: You can use tools to smooth the blades and folding axis, and then reset the Automatic servo folding machine parameters.
2.) Paper is stuck or twisted
If the paper is stuck or twisted, it may be due to incorrect parameter settings in the Fully automatic recycling origami machine or non-standard paper entering the device.
Solution: Reset the Filter folding machine parameter and strictly feed the paper in the specified direction.
Tags:
