Filter folding machines often encounter some problems during use, which are mainly divided into startup problems, status problems, and problems that affect work results. The following is a detailed analysis of these issues and corresponding adjustment methods:
1. Startup related issues and adjustment methods
The filter folding machine cannot start properly
Possible reasons: The power supply of the Filter paper flattening machine is not connected, the safety switch is not turned on, and the plug is loose.
Adjustment method: Check if the power supply of the Filter paper folding machine is connected, ensure that all safety switches are turned on, check if the plug of the Filter paper folding machine is securely plugged in, and if it is loose, re plug it in.
Automatic knife flattening machine – Electronic knife does not cut
Possible reasons: Damaged induction eye, electronic knife switch not turned on.
Adjustment method: Check whether the induction eye of the Automatic knife flattening machine is damaged, and replace it if it is damaged; Check if the electronic knife switch is turned on, if not, turn on the switch.
The receiving desk is not functioning
Possible reasons: Poor contact of the filter paper folding machine socket, and the speed adjustment switch of the receiving table set to “minimum”.
Adjustment method: Check if the filter paper folding machine socket is in good contact. If there is poor contact, re insert it; Check if the speed adjustment switch of the receiving desk is set to “minimum”, and if so, increase the speed.
2. Status related issues and adjustment methods
The surface of the paper loading table is uneven and uneven
Possible reason: Improper adjustment of the filter paper folding machine lifting platform chain.
Adjustment method: Check the lifting platform chain and adjust it to the same plane to make the Filter folding machine
Return to normal working condition.
- Problems and adjustment methods affecting the working results of Filter paper folding machine
Blockage during paper transportation
Possible reasons: The paper is not fully inserted into the folding tray, and there are curled corners on the paper.
Adjustment method: Check if the paper has fully entered the folding tray. If it has not fully entered, re feed it; Check if the paper has curled corners, and if so, adjust or replace the paper.
Friction between the electronic knife and the rubber roller during cutting
Possible reason: Improper position of the automatic knife flattening machine electronic knife.
Adjustment method: Calibrate the middle position between the two folding rubber rollers to ensure that the electronic knife does not rub against the rubber rollers when cutting.
In addition, for the Filter paper flattening machine, there may also be a problem of left and right shaking, which is usually caused by insufficient stability of the machine foundation, loose equipment components, or improper adjustment of the cardboard stack.
To address these issues, the following measures can be taken:
Ensure the stability of the machine foundation: Install the Filter paper folding machine on a flat surface, check if the support screws are tightened, and perform vibration isolation treatment if necessary.
Check and tighten components: Conduct a comprehensive inspection of the machine, tighten or replace loose components such as bearings, gears, etc.
Adjust the cardboard stack: Carefully adjust the height and position of the cardboard stack to ensure its precise positioning.
In summary, the Filter paper flattening machine may encounter various problems during use, but as long as we accurately identify the problems and take corresponding adjustment methods, we can effectively solve these problems, ensuring the normal operation of the Filter paper flattening machine and the quality of the output products.
