Filter paper folding machine is an essential equipment for producing folded filter cartridges, capable of producing filter cartridges for various industries and scenarios. Due to the widespread popularity of Filter Folding Machines, there are many users, which inevitably leads to some problems that arise during use. In order to facilitate the manual adjustment of filter production factories, CH Machinery Equipment (Shanghai) Co., LTD has collected some common problems for everyone and attached adjustment methods, hoping to be helpful to you.
Common issues with filter paper flattening machine
The common problems with filter folding machines are mainly divided into startup related issues, status related issues, and issues that affect work results. The common ones are as follows:
1. Equipment startup issues: unable to start normally, unable to dispense knives, and the bookshelf does not operate. When such problems occur, this cup generally does not work.
2. Filter folding machine status class issues: The paper loading table surface is uneven with height, and the paper feeding is skewed. When this problem occurs, it can affect normal operation.
3. Work result related issues: blockage during paper transportation, friction between the electronic knife and the rubber roller during cutting, etc. These issues can affect the quality of the output product.
Adjustment methods for common problems in Full Auto Filter Paper Pleasing Production Line
Regarding the common issues mentioned above, CH Machinery Equipment (Shanghai) Co., LTD Here are some adjustment methods for everyone.
1. When the Full Auto Rotary Filter Paper Pleasing Machine fails to start and operate normally, it is necessary to check whether the power and safety switches are all turned on. Sometimes, forgetting to turn on the switch or loosening the plug can cause this phenomenon.
2. When the electronic knife cannot be used, check whether the induction eye is damaged and whether the electronic knife switch is turned on. Generally, the possibility of induction eye failure is relatively high.
3. When the receiving desk is not running, check whether the socket is in good contact and whether the speed adjustment switch of the receiving desk is turned on to “minimum”. This is usually easy to detect and solve.
4. When the loading table surface is uneven and uneven, check that the lifting table chain is adjusted to the same plane to restore the Full Auto Rotary Filter Paper Pleasing Machine to normal operation.
5. When the paper feeding is skewed, it may be due to uneven tension of the conveyor belt, uneven or broken belt interface. The paper edge can be flattened in advance to avoid skewed paper feeding.
6. When there is a blockage during paper transportation, it may be due to incomplete insertion of the paper into the folding tray or curled corners. Adjustment can restore normal operation.
7. When the electronic knife rubs against the rubber roller during cutting, it should be calibrated to the middle position between the two folding rubber rollers.
If the problem with your Full Auto Knife Paper Pleasing Machine is not covered in the above content, or if the cause of the problem is different despite the same issue, you can contact your Full Auto Knife Paper Pleasing Machine manufacturer or call CH Machinery Equipment (Shanghai) Co., LTD. In general, manufacturers of Drum Type Air Filter Origami Machines have a better understanding of Filter paper flattening machines, so when choosing, we should pay attention to choosing manufacturers with reliable after-sales service.
Keywords：
Full-Auto Filter Paper Pleating Production Line
Full-Auto Rotary Filter Paper Pleating Machine
